Novelty
  • Flood-S8 - water leak detector

Flood-S8 - water leak detector

  • €39.90 Ex Tax: €32.44


The Trikdis Flood-S8 wireless water leak detector senses spilled water with electrodes and also warns with its built-in sounder. It belongs to the 868 MHz Trikdis S8 family: it requires a Trikdis RF-S8 receiver, connected to the FLEXi SP3 panel over the RS485 bus.

Features

Communication:

  • Water detection with electrodes
  • Built-in sounder >90 dB
  • 2× AAA battery (3 V), standby current ≤10 μA
  • Operating temperature −20 °C … +60 °C
  • Range in open field >100 m · radio 868 MHz

Connection:

  • Connects to the FLEXi SP3 panel through the Trikdis RF-S8 wireless receiver.

Please note! S8 series wireless devices work only with a Trikdis RF-S8 receiver. The RF-S8 connects over the RS485 bus to the FLEXi SP3 panel (firmware v1.22 or newer), and one RF-S8 is enough per panel. S8 devices communicate at 868 MHz and are therefore not compatible with the 433 MHz LoRa family (RF-LORA, M4).

Compatible devices

Supported Modules
RF-S8

Technical data

Frequency Band
867-869 MHz

Write a review

Note: HTML is not translated!
    Bad           Good

Related Products

Tags

Frequently asked questions

A Security panel or Control panel is the primary controller and supervisor of a security system.

A Security panel or Control panel is the primary controller and supervisor of a security system. It is a computer that arms and disarms the security systems, communicates with each installed component, like sensors and sounds the alarm when a security zone is breached, and optionally communicates with an alarm monitoring company.

There is no standalone Trikdis communicator that communicates exclusively over Wi-Fi, but the SIM-card communicators can be extended with the W485 Wi-Fi expansion module. There is also a purely Wi-Fi version, as well as a Wi-Fi + SIM 4G version, of the FLEXi SP3 alarm panel.

All questions

Related Articles

RF-S8 transceiver and S8 detectors – installation and pairing manual

RF-S8 transceiver and S8 detectors – installation and pairing manual

  • 02/11/2026

Installation manual for the Trikdis RF-S8 wireless transceiver and pairing of the S8 detectors with the FLEXi SP3 alarm control panel: wiring, the panel firmware, pairing with the Protegus 2 app, on the web interface and in TrikdisConfig, zone settings, deletion, indicators.

Read More
🇪🇺Official EU distributiondirect from the factory
🛠️Expert supportfor installers too
✓Factory warrantyon every product
🚚Fast deliveryfrom stock