Trikdis Expander IO expander module

The Expander IO is a wired expansion module for increasing the number of inputs (zones) and outputs (PGMs) on Trikdis communicators.

It enables remote control and switching of gates, heating, lighting or any other device.

Features

Inputs and outputs:
1 configurable input (zone): NC or NO
1 relay output (PGM)
1 connection for temperature sensor
Remote control and monitoring
Protegus 2 mobile and web application
SMS message
Output relay configurable for bistable or pulse switching with duration
Detailed zone events
Temperature data
Connection to communicator
RS485, up to 1 km twisted pair cable or
Wireless connection using iO-MOD
Connectivity limit: 8 expansion modules and up to 4 subsystems per Trikdis communicator.
Compatible Trikdis devices
G16 communicator
G16T communicator
CG17 communicator and controller

Specifications

Power supply - 10-28VDC
Current consumption - 50mA
Message encryption - Yes
Inputs - 1, configurable NC/NO
Relay output (PGM) - max 250VAC, 4A max
RS485 bus length - CAT5 twisted pair, max 1 km
Temperature sensors - 1, DS18B20 or DS18S20
Operating temperature range - -10°C - +50°C, 80% relative humidity at +20°C
Dimensions - 65 x 77 x 25mm

The IO-WL and iO-MOD can be added as wireless expansion modules to increase the number of inputs (zones) and outputs (PGMs) of the G16, G16T smart communicator or the CG17 smart alarm. The connection between the two units is established via bidirectional wireless (RF) radio frequency communication. This provides a practical solution where wiring is not available or feasible.

Main features

• 1 contact for temperature sensor
• 1 configurable input (zone): NC or NO
• 1 relay output (PGM)
• Monitorable and controllable via Protegus 2 mobile and web application
• Up to 300 m range in open area
• Signal Strength Indicator (SSI) allows real-time verification of connected module signal strength during installation
• Up to 8 expansion modules and 4 subsystems can be connected to one G16 communicator.