Trikdis IO8-LORA wireless expander module
- Manufacturer: Trikdis
- Item code: iO8-LORA
- Availability: In Stock
- Warranty: 2 years
- Categories: Smart Alarm System > Accessories > Wireless Devices > Expander Module
-
€59.90 Ex Tax: €48.70
With Trikdis LoRa wireless expansion devices, it is possible to create multiple remote connection points for the Trikdis FLEXi SP3 alarm system control panel.
One of its members is the IO8-LoRa expansion module. There are 8 contacts on the module, which can optionally be input (e.g. alarm zone) or controllable output (gate opening, pump start). A total of up to 8 controllable devices or zones can be doubled, and 16 alarm zones can be connected to it via wire.
Features
Communication:
- Line-of-sight wireless range up to 5000 m.
- Up to 8 iO8-LoRa wireless expanders can be connected to the “FLEXi” SP3 control panel.
Inputs and outputs:
- 8 I/O terminals, each one can be set as an input (IN) or output (OUT).
- Input (IN) types: ATZ, EOL, NC, NO.
- Different value of resistors can be used in EOL and ATZ type circuits.
Connection:
- The iO-8-LoRa wireless expander is connected to the “FLEXi” SP3 control panel via the RF-LoRa transceiver.
About LoRa technology in general
LoRa devices are revolutionizing the Internet of Things (IoT) by enabling data communication over longer distances than usual while consuming very little energy. LoRa is ideal for applications that transmit small amounts of data at low bit rates, and the data can be transmitted over longer distances than WiFi, Bluetooth, or ZigBee. It is also an ideal choice in places where the mobile network is too expensive and Wi-Fi coverage is not available.
LoRa is already widely used in street lighting, parking, buildings, smart metering and fleet management. The LoRa solution provides an intelligent sensor and control security system that allows connected devices to be easily controlled and receive messages in order to make intelligent decisions about the services offered.
Trikdis chose LoRa communication technology because it allows messages to be transmitted over much greater distances than traditional wireless networks. In many cases, this can significantly reduce the cost of building a complex smart security system due to infrastructure investments, battery replacement and overall operational costs. Such a solution allows devices or sensors to be connected at a distance of up to 1-5 kilometers, sometimes even further. This technology also passes through obstacles more easily than traditional radio communication, so it confidently transmits the signal over thick concrete walls or even on the ground, naturally with some loss of distance.
Advantages of LoRa technology:
- Low cost installation and operation
- Flexible deployment model
- End-to-end security
- Low power consumption, longer battery life
- High coverage for IoT where speed and latency are not critical factors
- Long range that penetrates obstacles more easily
Communication
Compatible devices
Contacts (inputs and outputs)
Technical data
Related Products
Tags
Frequently asked questions
Yes. Both expanders have 8 I/O terminals that can each be set as an input or an output; as inputs, the ATZ, EOL, NC and NO types are available. With ATZ zone doubling one expander provides 16 alarm zones instead of 8. Several resistor values can be used in ATZ and EOL circuits, so the existing wiring and resistors can be kept.
Yes, both expanders support ATZ zone doubling.
The IO8-LORA (wireless, via the RF-LORA transceiver) and the IO8 (wired, over RS485) each have 8 I/O terminals, and every terminal can be set individually as an input (IN) or an output (OUT).
As inputs, the following types are available: ATZ, EOL, NC, NO. With ATZ zone doubling one expander provides 16 alarm zones instead of 8.
Several resistor values can be used in ATZ and EOL circuits, so the wiring and the resistors of an existing system (Paradox, DSC, BOSCH, Crow) can be kept — when replacing a panel the detectors do not have to be rewired.
The input type and the resistor values are set in the alarm panel, using the TrikdisConfig programming software. The number of zones is of course limited by the total zone capacity of the panel.
Related Articles
Flexible Wireless Access Control with the GATOR RF-LoRa System
- 05/05/2026
The GATOR SIM and WiFi controller with RF-LoRa expansion enables a fully wireless access control system for up to 8 doors, managed via the Protegus 2 app.
Read More
GV17 GATOR gate controller – installation and programming manual
- 06/11/2026
Installation and programming manual for the Trikdis GV17 GATOR gate controller: wiring, SIM and setup in TrikdisConfig, users and permissions, control by phone call, SMS and from the Protegus 2 app.
Read More
iO8 input and output expander – installation manual
- 02/11/2026
Installation manual for the Trikdis iO8 input and output expander: connection to the RS485 bus, setting up the inputs and outputs in the control panel or communicator, use from the Protegus 2 app.
Read More
CG17 alarm panel – installation and programming manual
- 30/10/2026
Installation and programming manual for the Trikdis CG17 cellular alarm panel: wiring and SIM, detectors, outputs, expanders, setup in TrikdisConfig, reporting to the monitoring station, Protegus 2, SMS commands and control by phone call.
Read More
iO8-LORA wireless expander – installation and setup manual
- 02/11/2026
Installation and setup manual for the Trikdis iO8-LORA wireless expander: 8 inputs or outputs, input types and end-of-line resistors, wiring a relay, adding it to the FLEXi SP3 in TrikdisConfig, use with the GATOR gate controller, indicator lights, frequently asked questions.
Read More
G17F fire communicator – installation and programming manual
- 02/11/2026
Installation and programming manual for the Trikdis G17F cellular fire communicator (EN 54-21): wiring to the outputs or to the RS485 bus of the fire alarm control panel (ESPA 4.4.4, NSC Solution, INIM Smartline, C-TEC Cast ZFP), setup in TrikdisConfig, monitoring station, Protegus 2, control by SMS and phone call.
Read More
FireCom fire communicator – installation and programming manual
- 02/11/2026
Installation and programming manual for the Trikdis FireCom Ethernet and 4G fire communicator (EN 54-21, EN 54-4): power supply and battery, connection to the fire alarm control panel's outputs or RS485 bus (ESPA 4.4.4, NSC Solution, INIM Smartline, C-TEC Cast ZFP, Polon-Alfa 3000), setup in TrikdisConfig, monitoring station, Protegus 2, control by SMS and call.
Read More










