Trikdis CG17 4G GSM compact security control panel

The CG17 is a stand-alone, compact and FLEXible smart securty system. It can be both used as alarm system and as a remote control of equipment around the house, such as garage door, gate, heating, cooling, irrigation system, lighting, ventilation, etc. The integrated GSM / IP communicator allows communication in parallel to the monitoring station and the owner via the Protegus 2 Mobile and Web application.

Features

Messages to the security company

• Small and low power, self-contained alarm system and control device
• Backup power supply connection and charging option
• IP-based integrated communicator operating via GSM or 4G mobile network
• RS485 port for remotely monitored sensors or other compatible devices
• Reports events in Contact ID format to Trikdis software or hardware receivers which are capable of working with any monitoring software.
• Can report events to SIA DC-09 and SUR-GUARD TL150 receivers.
• In case connection to primary channel is lost, can send to backup receiver.
• Can report events to the central monitoring station using SMS messages. Extremely useful because it works even when IP connectivity is disrupted in the mobile operator’s network.
• Cellular network jamming recognition.
• Can simultaneously report events to the security company’s receiver and work with the Protegus 2 app. Possible to set priority for sending events to central monitoring station.

Messages to users

• Calls specified phone numbers (up to 8 users) and informs about events using recorded voice messages.
• Sends SMS messages about events.
• “Push” and special sound event notifications using the Protegus 2 application.

System and output control

• Using Protegus 2 app.
• Using contact (iButton) key reader.
• By calling the device’s phone number.
• Using SMS messages.
• Using an automatic “if…then” algorithm. E.g. when an input is enabled or the temperature exceeds a certain limit, an output will be turned on.

Expander, GPS receiver and battery support

• iO series expanders, which increase the number of inputs (IN) and outputs (OUT).
• Optional Wireless expander to control or superwise equipment with no wiring installed
• Optional GPS receiver (useful for protecting ATMs and vending machines or fleet tracking).
• Optional Strela RS485 fuel level sensor
• Backup power and charging of 12 V battery.

Settings and installation

• Quick and simple installation.
• Configuration of device either using an USB cable or remotely using TrikdisConfigsoftware.
• Remote updating of firmware.
• Two types of access levels (accounts), for the installer and for the administrator.
• Due to the Protegus 2 server, neither Fixed IP nor Dynamic DNS is required

Inputs and outputs

• 1 input, 2 outputs and 3 double I/O terminals that can be set either as input (IN) or output (OUT) terminals.
• One wire data bus (1-Wire) for connecting temperature sensors (up to 8) and a contact (iButton) key reader.
• By using an iO8 expander module, the number of inputs (IN) or outputs (OUT) can be increased to 12.