• Your shopping cart is empty!

Multi-language

Trikdis FLEXi LCD keypad

  • €85.90 Ex Tax: €69.84


Trikdis FLEXi LCD keypad is compatible with all FLEXi SP3 control panel and has a blue backlit LCD display and a touchscreen.

Key features:

  • Blue backlit LCD to display relevant information: system status, time, date, temperature, zones affected by alarms, faults, keypad settings
  • Displays and controls 8 areas
  • White glossy surface with blue button illumination
  • Touch buttons
  • Adjustable light and volume, automatic dimming
  • Alarm function keys
  • Temperature sensor, temperature display
  • 1 zone input
  • USB input to update the keypad firmware

trikdis flexi lcd keypad flexi-lcd 28

To change the language, enter the Menu with the MENU button, select the service menu by pressing 5, then press 1 (language) for language selection.
After you have selected the required language, do not forget to save the setting with the OK button.

Technical data

Operating environment
Power supply
Current consumption (nominal)
Current consumption (max)
Detachable terminal blocks
Size
Weight
Battery type
Battery Charge Current [BAT]
Power voltage and current for external devices [AUX]
Siren output [BELL]
output [LED]
PGM output

Related Products

Related Articles

Tags:

Frequently asked questions

A Security panel or Control panel is the primary controller and supervisor of a security system.

A Security panel or Control panel is the primary controller and supervisor of a security system. It is a computer that arms and disarms the security systems, communicates with each installed component, like sensors and sounds the alarm when a security zone is breached, and optionally communicates with an alarm monitoring company.

Typically, a keypad is located at the entrance, which allows arming and disarming the alarm system and informs you of the current state of the system.

Typically, a keypad is located at the entrance, which allows arming and disarming the alarm system and informs you of the current state of the system.

Hopefully not. Basically, the phone should be protected from any access by using a password or pattern or fingerprint. In addition, you can use password request when you start the Protegus application and also when you want remotely control something.

Hopefully not. Basically, the phone should be protected from any access by using a password or pattern or fingerprint. In addition, you can use password request when you start the Protegus application and also when you want remotely control something. At least one of them should be active, but two or three of these steps will make it pretty difficult for anyone to access your alarm system!

All questions